Light Sensors Indoor
Our range of indoor LED light sensors measure illuminance, which can be used to measure more than the brightness of a light source making these products ideal for use in warehouses, commercial spaces, industrial spaces and is ideal for large areas with aisles and racking.
1-10V 360° Photoelectric/Twilight Sensor IP20
£15.00 ex. VAT (£18.00 inc. VAT)
1-10V 360° Photoelectric/Twilight Sensor IP20
£15.00 ex. VAT (£18.00 inc. VAT)
IP20 | 25 x 65mm
With a 360° detection radius this sensor allows for an increase or decrease in brightness. It is 1-100% Dimmable.
Compatible with lights equipped with 1-10V dimmable driver.
In stock
120° Recessed PIR Presence Detector Detection – Distance: 7 to 10 Metres
£7.49 ex. VAT (£8.99 inc. VAT)
120° Recessed PIR Presence Detector Detection – Distance: 7 to 10 Metres
£7.49 ex. VAT (£8.99 inc. VAT)
Detection Distance: 7 to 10 Metres | Detection Angle: 120°
<> 120° Recessed PIR Presence Detector
This PIR Presence Detector will activate when a heat source moves in front of the sensor and deactivates when the heat source is no longer detected, and a period of time has elapsed.
This PIR can be either installed onto a wall or recessed into a ceiling. Detecting movement of up to 7 to 10 metres when installed in a ceiling at a height of 2.2 to 4m & 1.8 to 2.5 wall mounted.
In stock
360° Surface PIR Presence Detector – Detection Distance: 3 to 6 Metres
£11.00 ex. VAT (£13.20 inc. VAT)
360° Surface PIR Presence Detector – Detection Distance: 3 to 6 Metres
£11.00 ex. VAT (£13.20 inc. VAT)
Detection Angle: 360°
360° Surface PIR Presence Detector
This Surface PIR Presence Detector will activate when a heat source moves in front of the sensor and deactivates when the heat source is no longer detected and a period time has elapsed.
In stock
MerryTek 1-10V Microwave Motion Daylight Smart Sensor 120-277V – IP65
£29.99 ex. VAT (£35.99 inc. VAT)
MerryTek 1-10V Microwave Motion Daylight Smart Sensor 120-277V – IP65
£29.99 ex. VAT (£35.99 inc. VAT)
120-277V
One free remote per 10 sensors purchased
This is an ideal sensor when used in conjunction with LED High Bay Lights (1-10VDimmable).
The dimming function can be disabled and used as a Microwave Sensor on any other lighting fitting including:
- High Bays (dimmable or none dimmable)
- Low Bays
- Multi Bays
- Tri-Proof Battens
- LED Panels
3-Step dimming
Used in combination with 1-10V dimmable LED drivers.
In stock